#1900 - 10MM Auto Brass (Large Pistol primer)

I've loaded Starline Brass for the last two years in 10MM, .44 Mag./.44 Spl. .444 Marlin and .308 Winchester I cannot find any better brass on the Market for quality and price.

i finally got to order 10mm. I expected with the staff at Starline to be overworked and this brass might not be up to snuff. I was wrong this is the best brass I ever received from Starline. Most of those i looked at were .987 with a few falling to .985. Then I started weighing them and of the 30 I weighed they were within hundredths of a grain. Sure 1 of 50 would be as much as two tenths of a grain and 3 or 4 of 50 close to a tenth of a grain. But the vast majority were within hundrethsI have not looked at the 9mm and 40SW yet. I hope they are as good. I use a laboratory scale with a certified weight. Its fast as I can weigh a piece every 2 to 3 seconds. It may not be the best brass out there, but for .19 cents no one else compares.

The 10mm is the newest Starline I have used. I load hot hunting level loads in it. Zero issues.

Starline has been outstanding brass for my original loads and reloads. Handles a hotter load without issues.

Been using starline brass for 12 years. They create the most consistent and quality product i've come across. Starline has the product and people that keep me coming back to them. Thank you Starline team for a great quality affordable product!

This brass in my Dillion 650 with Dillion Dies is so smooth it is like I am working with a soft warm stick of butter!

fine brass and fine people. Never a hitch in dealing with them.

Best brass on the market, very clean and uniform. I highly recommend.

Have bought several thousand rounds of 10mm and 40sw brass over the years, Never disappointed. Friendly folks, fast delivery when item is in stock. I use starline 100% these days.

Every piece of brass that I have used so far before sizing has been approximately 0.002 before sizing after sizing I'm right where I want to be 0.987 though that I bought about 500 pieces from different Lots every one of them has been consistent

I use these cases to form 9x25Dillon brass, and with excellent results. The brass is very uniform and runs smoothly through the forming die with just a touch of simple inexpensive plain Vaseline. philimandias - Belgium

Starline never fails to impress. Their brass is worthy of your time and effort of reloading the perfect round. Anytime I decide to make that "uber" loading in that pet caliber... I always reach for starline.

Excellent and very uniform brass. I also start with these to form 9x25Dillon cases for use in my Dlask Master Class race gun, and they last very well. philimandias - Belgium

Purchased twice so far, will be buying more. Best 10mm brass.

I have used Starline brass for many decades now but only the 10mm just in the last 3-4 years. The 10mm brass has stood up very well to medium to hot loads. Some of the brass has been loaded 4-5 times and I haven't had to trim it yet. I have some DT brass that has had to be trimmed but the Starline is still going strong. Great product.

Id give a 10 if I could, very consistent diameter. With the 10mm, I didn't even need to run them through the sizing die before loading. I've loaded these brass with 10.2 Longshot, 180 Montana Gold and have had 6+ loading's. No signs of brass deformation as of yet.

I was new to reloading and purchased once fired brass from various sellers. I had to clean measure and trim most pieces. Then the number i had to discarded was discouraging. As a newbie to reloading i was very careful to follow best practices when preparing brass for reloading. Finding 10mm to reload was impossible. After finding Starline i don't even do the once fired stuff anymore. It is so much easier to use high quality better priced new brass. Starline even sells new .454 casull to reload. the price on once fired was crazy and that's if you could find it. I say this again, Thank You Starline.

I shoot over 50,000 rounds a year in competive shooting. I exclusively use star line in both my production and unlimited pistols. It's a fair deal for the highest quality brass period.

I have been using Starline brass for over 10 years. It is the highest quality brass on the market. Amazing quality at a fair price. I always recommend Starline to anyone interested in reloading

Best brass in the industry. Have reloaded and reused this brass several times and still looks new when cleaned. If ur looking for quality brass starline is ur only choice.

I have reloaded almost every brand of brass in the last 35 yrs. I ordered 1000 pcs of 10mm Starline last spring and have reloaded almost all of it once .This is great brass .It is smooth and consistent with no issues what so ever .Great price too ,Less expensive than the range brass hounds wanted for once fired pickup brass....Thanks Starline for a great product at a great .

Chances are good that if you are already here looking for 10mm Auto cases, you already know they are THE choice manufacturer. But for those budding 10mm handloaders, here's my experience and why they deserve and get excellent reviews. I started out using Starline brass cases for 10 MM Auto about 4 yrs ago and have continued with them since. Products have literally been perfect. No defective pieces or loading issues (press&firearm) ever. Their customer service and product quality is the best in the industry for 10mm Auto hand loaders. As a result, I'm a customer-for-life. I have ordered several thousands of cases. On one occasion, I had ordered (4000) 10mm on backorder (ca. 2013). Once they were produced and ready to ship, I received a personal call; twice in one day (I missed the first call) from a customer service rep to verify and ensure my product order was acceptable b4 shipping. That is just fantastic customer service! I am still reloading that same lot of cases to date, three years later. Starline Brass is my one-stop shop for new high quality cases.

No issues at all , brass was in perfect condition , checked threw case gage first with all in spec flared and loaded gun runs great with them .

I ordered 5,000 of these before, only have 500 left, so I ordered another 2,000. These things ran like peanut butter and jelly on my D-650. I have not found a single flawded piece of brass. keep up the great work, Starline. Have a blessed day. fm

starline brass is of exceptional quality, very consistent in length and the flash holes are excellent

ONE SLIGHT DING IN 500 IN 500 BRASS STARLINE BRASS IS THE BEST I HAVE EVER RELOADED

I've been reloading for over 45 years and have reloaded just about every name of brass on this Planet, and would rate Starline brass the best brass available for reloades. I rate them right up there with Norma Brass which I considered the Worlds finest. Starline Brass is uniform and their primer pockets should be the envy of the industry, always making the priming operation a breeze. They use only quality brass that will give a average reloader many reloader. Going forward Starline will be the only brass on my reloading table.

I've given up on once fired brass sense I started using new Starline; ready to load right out of the box. Always exceptional quality. Now I use only Starline for all my pistol calibers. Thanks.

i ordered 1k 10mm auto brass. there's nothing bad i can say about it other than i wish i could still order some, im not sure why it is never available. please consider making this other then in small batches.

I should have bought more when it was in stock. I bought 500 nickle and 1000 brass and have reloaded both 3 times without fail. Excellent quality first loading, second loading and still holding perfect on the third. Very highly recommend.... after I get stocked back up, of course

I've ordered 2000 of your 10mm Auto cases and every one has been flawless. Keep up the good work!

Purchased the 500 round option. All cases were within 0.1 from speck with around 90% all the same size. Better that 99% of the brass I am used to using. I load to over max and have been able to get 3 reloads from a case and have reloaded some cases 6 times with moderate loadings. What do you want to know about this brass? I was very satisfied. Liked it more than other major manufacters. As far as new brass goes this was very pleasurable to reload from consistency being so well. I also trusted it more. I have not had one starline brass case in any loads I used be one that I would ever put in the lesser pile. Elricker, OR

Absolutely awesome pricing for a quality product. I've purchased 3000 of these gems in the past 3 or 4 years and I don't even shop anywhere else because nobody can beat this quality and prices.

I first purchased 200 new 10 MM auto brass. I mesure and trim every piece i shoot and/or purchase. I also uniform/drill the flash hole on all brass. I went through 100 of my new brass and to my total surprise there was no shavvings...only a slight bit of brass dust. I have never seen such results. I weighed the cases and surprised again. The flash holes were perfectly clear...NEVER seen that before with any brass, European or American. I then investigated to find that Starline punches the brass not drills it to leave ridges of brass build up in the case. Thank You Starline. Ed Sparks

Your brass is reasonably priced and cost the same as others selling once fired brass! I have always had great service from your company and from your brass. I recommend Starline Brass to my reloading buddies!