Forest
Mountain
Sunset
Brass Cases

Unprimed Brass Cases


45-70 Gov't Brass (Large Rifle primer)

45-70 Government Brass, 45-70 Marlin Brass, 45-70 Govt Brass
2.095 - 2.102 O.A.L.

Our .45-70 brass has been tested at elevated pressures suitable for Magnum Heavy Hunting Loads in adequate gun systems. When loading with black powder, annealing of mouth may be necessary to allow case to properly seal chamber due to lower pressures generated by these loads. Our case is produced very strong to withstand high pressure loads associated with smokeless hunting loads and since the only way to make brass harder is to work the material our only option is to leave them stiffer so the customers can anneal for specific application. See annealing procedure in Commonly Asked Questions, section #4.

Status: Order Now - Ship Date: 09/18/2015


Box of
Quantity
45-70 Gov't Brass
FIRST COME - FIRST SERVED
The reloading industry is experiencing unprecedented demand on all component categories, and we at Starline are doing our best to produce the highest quality unprimed brass possible to satisfy our customer's orders. During this time of extreme demand, we are asking our customers to place orders now to assure the quickest shipping date possible. All orders are shipped based on the date of order. If shipment of your order is held due to backorder, the pre-authorized amount of your order is put on hold and reserved against the credit limit of your card and will remain there until shipment is made and your card is charged. Please place your order now and be assured we will fill it as quickly as possible with the high-quality unprimed brass you expect from Starline. Thank you for trusting Starline.

Share on Facebook


Reviews

Overall Rating
5 Stars5 Stars5 Stars5 Stars5 Stars
Rate This Product
Mike C of Martinsburg, West Virginia
5 Stars5 Stars5 Stars5 Stars5 Stars
Date Posted: 01/22/2015
Beautiful brass, free of flaws or shipping damage. Sizes and loads perfectly; case weights are extremely close together for those that might find continuity important. Very strong with almost no change in size at the case head end under moderate load pressures. Should be able to get many, many loadings out of these. Highly recommend them!
Was this review helpful? Yes No 232 found it helpful | 200 did not
Jeff H of Wadsworth, Ohio
5 Stars5 Stars5 Stars5 Stars5 Stars
Date Posted: 08/29/2014
This is excellent brass. Very uniform in weight and size. I can get 5+ loadings with high velocity loads in my 1895 Marlin. Cases seem to last forever with low velocity Springfield "Trap Door" loads. I will buy again.
Was this review helpful? Yes No 212 found it helpful | 207 did not
Buford T. J of Stony Point, New York
5 Stars5 Stars5 Stars5 Stars5 Stars
Date Posted: 05/26/2014
Great product for the money. Lower in price but Higher in Quality than ANY of the bigger name brands! Keep up the good work. I HOPE/WISH Starline would decide to make 25-20 Brass! I know I'm not the only one who would like to see it as a cataloged item! The 25-20 is a Great little round and its not as dead as some believe.... So Starline, Co. listen to a faithful customer and get on the 25-20 wagon! :-) Thanks BloodGroove4570
Was this review helpful? Yes No 215 found it helpful | 233 did not
R H P of Clarksville, Tennessee
5 Stars5 Stars5 Stars5 Stars5 Stars
Date Posted: 05/07/2013
Want to make a 2,700 fps 40-45-70 round. Start with Starline brass and 200 grain XTP. That is right, with this brass, a quality modern rifle, and a Sabot, you too could have a sub- MOA 200 yard rifle ready for MS primitive weapon season with the recoil of a 20 GA.
Was this review helpful? Yes No 304 found it helpful | 219 did not
Phillip W of Pulaski, Tennessee
5 Stars5 Stars5 Stars5 Stars5 Stars
Date Posted: 09/08/2012
I reload for both my 1873 Trapdoor rifle and my 1874 Shiloh Sharps carbine and have had excellent results with Starline's brass. Reloading for trapdoors can be very difficult as they are extremely sensitive to different types of smokeless powders and bullet types. After many repeated tries with three different powders and three different bullet weights/styles I finally succeeded on a satisfactory, accurate load. With only 40 Starline cases to begin with, they held up admirably with very little case stretching. To help with 45/70 case longevity I used a Lyman neck sizing die. I really like the quality of Starline, and yes , I noticed they're heavier walled than Remington's or Winchester's.
Was this review helpful? Yes No 11433 found it helpful | 7793 did not